HomeMy WebLinkAboutexamples-of-plan-check-requirementsPage 1
This guide is to assist you in drawing and
submitting your own original drawings.
Do not submit these samples as your own.
These pages are available for reference only.
Page 2
PLUMBING DIAGRAM WITH 3 COMPARTMENT SINK
Plumbing Notes:
• All plumbing lines shall be connected to the tanks with watertight seals.
• Potable water lines, couplings, and valves shall be listed to NSF standards for drinking water.
• Potable water tanks and wastewater tanks mounted in the CMFO shall have an air vent
overflow installed draining outside of the CMFO in a downward direction covered with 16 mesh
per square inch screen.
• Tanks may be removeable. If they are not removeable, they must be equipped with a fill line
that has a nonthreaded quick disconnect coupler. They must also be installed sloped towards a
drainage outlet equipped with a valve.
• Tanks and hose inlets and outlet fittings shall be protected with a cap and keeper chain, quick
disconnect, or closed cabinet when not in use.
• Waste lines must be a different color than the lines for potable water.
• The 3-compartment sink must be stainless steel and equipped with dual integral drainboards
that are at least the size of one of the compartments.
WATER PUMP MANUFACTURER AND MODEL:
WATER HEATER MANUFACTURER AND MODEL:
Page 3
PLUMBING DIAGRAM WITHOUT 3 COMPARTMENT SINK
Plumbing Notes:
• Water heater is optional.
• All plumbing lines shall be connected to the tanks with watertight seals.
• Potable water lines, couplings, and valves shall be listed to NSF standards for drinking water.
• Potable water tanks and wastewater tanks mounted in the CMFO shall have an air vent
overflow installed draining outside of the CMFO in a downward direction covered with 16 mesh
per square inch screen.
• Tanks may be removeable. If they are not removeable, they must be equipped with a fill line
that has a nonthreaded quick disconnect coupler. They must also be installed sloped towards a
drainage outlet equipped with a valve.
• Tanks and hose inlets and outlet fittings shall be protected with a cap and keeper chain, quick
disconnect, or closed cabinet when not in use.
• Waste lines must be a different color than the lines for potable water.
WATER PUMP MANUFACTURER AND MODEL:
WATER HEATER MANUFACTURER AND MODEL:
Page 4
Standard Operational Procedures for Unpackaged Compact Mobile Food Operations
Compact Mobile Food Operation Name: ______________ Health Permit Number: ________________
Hours of
Operation
Location Of Operation: __________________________CITY: __________________________________,CA ZIP:___________
Business Owner Name: ___________________________________________PHONE: ________________________________
FAX: ( ___)________________ EMAIL: ________________________________
Mailing Address: _______________________________________City:____________STATE:_______ZIP:________________
1. Indicate the location where you will store food at the end of the day.
Food Stored at: ____________________________________________City:____________________, CA Zip_______________
Street No. Street Name
2. Indicate the location where you will store the Compact Mobile Food Operation (CMFO) unit at the end of the day.
CMFO Stored at: City: ___________________, CA Zip:______________
Street No. Street Name
3. Name of business providing restroom facility during hours of operation:
Business location: _________________________________________City: ___________________, CA Zip:_______________
Street No. Street Name
4. Describe the procedures you will use to clean and sanitize food contact surfaces, equipment, and utensils during
working hours and at the commissary.
During working hours At the Commissary
Clean
Sanitize
5. Indicate the specific sanitizer or sanitizing method that you will use by checking the box below:
Contact with a solution of 100 ppm (parts per million) available chlorine for at least 30 seconds.
Contact with a solution of 200 ppm available quaternary ammonium for at least one minute.
Check the option you will use: Commercial pre-mixed solution or
I will prepare my own sanitizer solution
6. Indicate location for disposal of trash and refuse
Street Name: ____________________________
City: , CA Zip:
Time Mon Tue Wed Thur Fri Sat Sun
Start: ❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
End: ❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
❑ am
❑ pm
Page 5
EXAMPLE PLAN WITH REQUIRED 3 COMPARTMENT SINK
LIST OF MENU/ITEMS BEING SOLD
Espresso, Lattes, Acai Bowl, Fruit Smoothies, Prepackaged Nutrition Bars, and Whole Fruit
FINISH MATERIALS
*Raw wood not permitted to be used as exterior CMFO material
LOCATION/EQUIPMENT MATERIAL
Exterior of CMFO Stainless Steel
Interior of CMFO Stainless Steel/ Fiberglass Reinforced Panel (FRP)
Food Storage Area FRP
Food Preparation Compartment N/A
Other: Exterior Vinyl Trim
EQUIPMENT MANUFACTURER MODEL
Espresso Machine Nuova Simonelli Appia Life Compact2
Blender Vita Mix 36019-ABAB
Undercounter Refrigerator Bev-Air UCR27HC
Coffee Brewer Bunn Axiom DV APS
Air Pots Bunn 32130.000
Acrylic Prepackaged Food Display Custom Custom
Ice Bin with 2 Piece Lid Moli International BIB-1118-D 13”
Soap Dispenser San Janmar S30TBK
Paper Towel Dispenser Bobrick B-2620
POWER/GAS PLAN
Select all applicable options and fill in the blanks for each one:
DC Battery* (Quantity _1_) AC Battery (Quantity ) Propane Tank (Pounds ; Quantity )
*Requires Inverter
FOOD SERVICE EQUIPMENT LIST
Page 6
LEFT SIDE VIEW OF CMFO- Internal View Showing Equipment Placement
9.
8. 7.
6.
1.
4. 5.
10.
2. 3.
1. Refrigerator
2. Battery, 12V 277 Amps
3. Inverter
4. 40 Gallon Wastewater Tank
5. 20 Gallon Tank Potable Water Tank
6. 6 Gallon Water Heater
7. Water Pump
8. 3-Compartment Sink
9. Handwashing Sink with Soap and Paper Towel Dispenser
10. 6” Swivel Casters
Page 7
RIGHT SIDE VIEW OF CMFO- Showing Customer Side
2.
3. 6.
5.
1. 4.
HEALTHY PICK ME UP
Chula Vista, CA, 91911
1. Airpot Coffee Dispenser
2. Coffee Brewer
3. Display Shelving
4. Point of Sale- Register
5. Flavored Syrup with Pumps
6. Espresso Machine
*NOTE: Lettering of the business name: 3” high minimum
City, State, and Zip Code of the permit holder: 1” high minimum
Page 8
TOP SIDE VIEW OF CMFO
9.
1.
5. 8.
2. 6.
10.
3.
4.
7.
1. Point of Sale - Register
2. Flavored Syrup with Pumps
3. Espresso Machine
4. Blender
5. Ice Bin with 2 Piece Lid
6. Grommet for Umbrella
7. 3-Compartment Sink
8. Display Shelving
9. Airpot Coffee Dispenser
10. Coffee Brewer
Page 9
LEFT END FROM CUSTOMER SIDE VIEW OF CMFO
2. 3.
1.
1. 3-Compartment Sink
2. Coffee Brewer
3. Airpot Coffee Dispenser
4. Quick Disconnect Potable Water fill with Chain
And Cap
4.
RIGHT END FROM CUSTOMER SIDE VIEW OF CMFO
1. Point of Sale - Register
2. Flavored Syrup with Pump
2. 3. Espresso Machine
4. Cup Storage Area
3.
1.
4.
Page 10
PLUMBING DIAGRAM WITH 3 COMPARTMENT SINK
35” 13” 45” 20”
Plumbing Notes:
• All plumbing lines shall be connected to the tanks with watertight seals.
• Potable water lines, couplings, and valves shall be listed to NSF standards for drinking water.
• Potable water tanks and wastewater tanks mounted in the CMFO shall have an air vent
overflow installed draining outside of the CMFO in a downward direction covered with 16 mesh
per square inch screen.
• Tanks may be removeable. If they are not removeable, they must be equipped with a fill line
that has a nonthreaded quick disconnect coupler. They must also be installed sloped towards a
drainage outlet equipped with a valve.
• Tanks and hose inlets and outlet fittings shall be protected with a cap and keeper chain, quick
disconnect, or closed cabinet when not in use.
• Waste lines must be a different color than the lines for potable water.
• The 3-compartment sink must be stainless steel and equipped with dual integral drainboards
that are at least the size of one of the compartments.
WATER PUMP MANUFACTURER AND MODEL: Pentair Shurflo 2088-594-144
WATER HEATER MANUFACTURER AND MODEL: EEMax MiniTank EMT 6
12
”
11”
Page 11
EXAMPLE PLAN WITHOUT 3 COMPARTMENT SINK
LIST OF MENU/ITEMS BEING SOLD
Steamed Hot dogs, Prepackaged- Ketchup, Mustard, Relish, Mayonnaise (shelf stable), Canned Soda, Bottled Water
FINISH MATERIALS
*Raw wood not permitted to be used as exterior CMFO material
LOCATION/EQUIPMENT MATERIAL
Exterior of CMFO Stainless Steel
Interior of CMFO Stainless Steel/ Fiberglass Reinforced Panel (FRP)
Food Storage Area FRP
Food Preparation Compartment N/A
Other: N/A
EQUIPMENT MANUFACTURER MODEL
Undercounter Refrigerator Bev-Air UCR27HC
Bun Warmer APW Wyott BWD-75N
Electric Steam Table Wells 5P-SS206-120
POWER/GAS PLAN
Select all applicable options and fill in the blanks for each one:
DC Battery* (Quantity _1_) AC Battery (Quantity ) Propane Tank (Pounds ; Quantity )
*Requires Inverter
FOOD SERVICE EQUIPMENT LIST
Page 12
LEFT SIDE VIEW OF CMFO- Internal View Showing Equipment Placement
2.
6.
7.
8.
1.
3.
9.
4.
5. 10.
1. Refrigerator
2. Bun Warmer
3. Potable Water Tank
4. Wastewater Tank
5. Water Pump
6. Handwashing Sink with Soap and Paper Towel Dispenser
7. Drop-in Steamer
8. Water Heater
9. Battery 12V, 277Amp
10. Inverter
Page 13
RIGHT SIDE VIEW OF CMFO- Showing Customer Side
2.
ROB’S DOGGZ
San Diego, CA, 92111
1.
1. 6” Swivel Casters
2. Bun Warmer
*NOTE: Lettering of the business name: 3“ high minimum
City, State, and Zip Code of the permit holder: 1” high minimum
Page 14
TOP SIDE VIEW OF CMFO
2.
4. 1.
1. Bun Warmer
2. Drop-in Steam Table
3. Handwashing Sink with Soap and Paper Towel Dispenser
4. Grommet for Umbrella
3.
Page 15
1. 1.Bun Warmer
2.6” Swivel Casters
2.
1. 1.Bun Warmer
2.6" Swivel Casters
3.Push Bar
Paper Towel Dispenser
4. 3. 4.
2.
LEFT END FROM CUSTOMER SIDE VIEW OF CMFO
RIGHT END FROM CUSTOMER SIDE VIEW OF CMFO
Page 16
PLUMBING DIAGRAM WITHOUT 3 COMPARTMENT SINK
Plumbing Notes:
• Water heater is optional.
• All plumbing lines shall be connected to the tanks with watertight seals.
• Potable water lines, couplings, and valves shall be listed to NSF standards for drinking water.
• Potable water tanks and wastewater tanks mounted in the CMFO shall have an air vent
overflow installed draining outside of the CMFO in a downward direction covered with 16 mesh
per square inch screen.
• Tanks may be removeable. If they are not removeable, they must be equipped with a fill line
that has a nonthreaded quick disconnect coupler. They must also be installed sloped towards a
drainage outlet equipped with a valve.
• Tanks and hose inlets and outlet fittings shall be protected with a cap and keeper chain, quick
disconnect, or closed cabinet when not in use.
• Waste lines must be a different color than the lines for potable water.
WATER PUMP MANUFACTURER AND MODEL: Pentair Shurflo 2088-594-144
WATER HEATER MANUFACTURER AND MODEL: Chronomite Labs SR-20L/120 HTR-I
12.25” X 12.25” X 8.25” 13” X 12” X 12”
Page 17
PLUMBING NOTE EXAMPLES
The following are some examples of the types of equipment that can be used to accomplish the code requirements.
1. All plumbing lines shall be connected to the tanks with watertight seals.
Watertight seal with attached ball valve on the side wall of a tank
Inside tank view of watertight seal
2. Potable water lines, couplings, and valves shall be listed to NSF standards for drinking water.
PEX Piping Ball Valve ANSI/NSF 61 Label on handle
Page 18
Straight Coupler with ANSI/NSF Label on bag PEX Potable Water line with NSF- 61 label
3. Potable water tanks and wastewater tanks mounted in the CMFO shall have an air vent overflow installed draining
outside of the CMFO in a downward direction covered with 16 mesh per square inch screen.
Pipe with mesh Typical mesh screens
Page 19
4. Tanks may be removeable. If they are not removeable, they must be equipped with a fill line that has a
nonthreaded quick disconnect coupler. They must also be installed sloped towards a drainage outlet equipped
with a valve.
Fill line to non-portable tank with a Removeable portable tanks
quick disconnect coupler
Non-portable tank with connections to vent, Removeable portable tank with quick
fill, drain, and for the water pump disconnect for supply or waste water
(black lines typically denote waste)
Page 20
5. Tanks and hose inlets and outlet fittings shall be protected with a quick disconnect
Quick disconnect coupler
6. Waste lines shall not be the same color as the lines for potable water.
Potable white PVC line with NSF label Non-potable/wastewater black PVC pipe
Blue potable PEX line with NSF label Clear potable vinyl line with NSF